Related Manuals for iGen LP-2
Summary of Contents for iGen LP-2
- Page 1 User Manual User Manual for Pro Logger Model: LP-2 IGEN Tech Co., Ltd. Add: Block F4, China IoT International Innovation Park, No. 200, Linghu Avenue, Wuxi, Jiangsu, P. R. China Tel: +86-400-181-0512 Email: info@solarmanpv.com Website: www.solarman.cn...
-
Page 2: Product Description
Notice Dear Users, Thank you very much for using our product-Pro Logger (Model: LP-2). We sincerely hope that this product can meet your requirements properly. If you have any comments or suggestions, please feel free to contact us. Please read this quick guide carefully before using products and keep it at where O&M providers can easily find. - Page 3 User Manual Picture Size L/mm W/mm H/mm Material...
- Page 4 User Manual Parameter Communication 1 4G Remote Communication Communication 2 4G Ethernet Input Voltage DC 15V~60V Working Power <10W Output Voltage DC 12V 500mA Working Temperature -20℃~+60℃ Extended Working -40℃～+85℃ Temperature Storage Temperature Hardware -40℃~+85℃ Parameter Relative Humidity 4~95% (No Condensation) Storage Relative Humidity 10~95% (No Condensation) Light...
-
Page 5: Installation
User Manual Interface Identification Name Identification Power In Voltage Input: DC 15V~60V/Power: <10W (Make no distinction between positive and negative electrode) Power Out Voltage Output: DC 12V 500mA Ethernet Ethernet: 10/100M (adaptive)/RJ45/max. communication distance: <100m 1 mini USB/USB2.0 protocol/<60MBps/max. conductor length<5m Reload/Reset Reboot (Press for 3s) Restore factory settings (Press for 10s) - Page 6 User Manual Name Pro Logger Power Air Switch Power Cord COM Line SMA Antenna Quantity Tool Name Picture Percussion drill Wire stripper Multiple-use meter Side cutter plier Slotted screwdriver Electrical tape Expansion screw Adjustable spanner Laptop (Mesh port required) Position 1.
- Page 7 User Manual Step 1: Connect power output of air switch and power input L/N interface of power module via cable...
- Page 8 User Manual Air Switch AC Output Power AC Input Step 2: Connect power output of power module (V+ and V-) and power input of LP-2 via cable Power DC Output -V -V +V +V LP-2 DC Input Step 3: Connect RS485 interface according to actual situation (One 485 interface can connect to 32 devices at max.)
- Page 9 User Manual Ethernet Step 5: Install logger antenna Install the antenna Step 6: Make sure the air switch is at opening status and connect to AC power Air Switch AC Iutput Step 7: Close air switch and check logger indicator lights...
-
Page 10: Parameter Settings
User Manual Inverter Connection Connect to single inverter Inverter communicate withLP-2 via RS485 (COM1/COM2/COM3/COM4) Steps 1. Peel off the insulation of RS485 com line 2. Connect logger RS485A/RS485B interface to inverter via 485 com line Connect to multiple inverters Pro logger can connect to multiple inverters via hand in hand connection. The max. number of devices on each line is 32. (If users want to connect to a weather station, please put the weather station at the end of the line.) Parameter Settings Connect logger to computer network port via cable (Power on the logger and turn off computer WiFi function) - Page 11 User Manual Open a browser and enter 169.254.254.254 to go to configuration page Mobile COM Parameter Settings Modify APN and server direction according to the requirement Ethernet Parameter Settings Ethernet Data Transmission Work Mode: Transmission Mode and click Save Set server direction and click Save.
- Page 12 User Manual Ethernet Data Acquisition Work Mode: Collect Mode DHCP: Disabled Set IP address and click Save. Serial Port Parameter Settings Scenario 1: Connect to single device If the address is 1, please enter 1-1. Scenario 2: Connect to multiple devices (e.g. 20 devices) If the address is from 1-20, please enter 1-20.
- Page 13 User Manual Monitoring 7.1 Registration&Create a New Plant Users can go to SOLARMAN Business Web/APP to check plant data and plant running status. APP: Scan the QR code below to download SOLARMAN Business APP or go to Google Play/App Store and search SOLARMAN Business to download.
- Page 14 User Manual Step 2: Log in to SOLARMAN platform, click “Create a Plant” in the upper-right corner and enter plant information here. Step 3: Go to a target plant, click “Add” in the upper-right corner, select “Gateway/Logger”, and enter device SN here. 7.2 Data Checking Users can go to SOLAMMAN Business Web/APP to check plant data.
- Page 15 User Manual Contact IGEN Tech Co., Ltd. Add: Block F4, China IoT International Innovation Park, No. 200, Linghu Avenue, Wuxi, Jiangsu, P. R. China Tel: +86-400-181-0512 Email: info@solarmanpv.com Website: www.solarman.cn...
Need help?
Do you have a question about the LP-2 and is the answer not in the manual?
Questions and answers