White And Black-Point Values; White Balance (Raw Only) - Konica Minolta DiMAGE Master Lite Instruction Manual

7.5.1 WHITE AND BLACK-POINT VALUES

The white and black-point values are set to 255 and 0 for each RGB level. Changing these values
allow the calibration of an image with no true white or black. This is an advanced image-processing
tool.
Double-click on either the white-point or black-
point button to activate the point-value-setting
dialog box.
Input the new white-point or black-point values.
Click the OK button.
With the point-value-setting dialog box open, the
mouse pointer can be used to measure the color
of any point on the displayed image.
Calibrate the image following the steps in
section 7.5: white, black, and gray point
processing.

7.6 WHITE BALANCE (RAW ONLY)

White balance controls the overall color of the
image. Adjust white balance before using the
filter-effects palette so that image color can be
judged accurately.
The list box automatically applies the camera
white-balance setting used when the image was
captured or balances it to a specific light source.
The Auto Precision Analysis option automatically
adjusts white balance.
Master Notes
The full version of DiMAGE Master allows white balance to be calibrated with color temperature
and CC index data collected with a color meter or using sampled neutral areas directly from the
RAW image.
50 SECTION 7: ADVANCED PHOTOFINISHER