Using The Easy Scan Utility - Minolta Dimage Scan 1.1 Software Manual

Using the Easy Scan Utility

When the Easy Scan Utility is launched, the Easy Scan Wizard opens. Simply follow the instruc-
tions on the Wizard to scan images. Screens and functions differ between scanner models.
The status bar at the top of each window gives instructions or describes function on which the
mouse pointer is located.
To exit the Easy Scan Utility at any point, click the quit button in the bottom left corner of the win-
dow. The film holder will be ejected automatically.
Scanner Notes (Macintosh)
To cancel an index scan, prescan, or final scan once it has started, click and hold the
mouse on the cancel button in the progress dialog box or press and hold the command
and period (.) keys until the cancel button appears to depress.
A screen requesting a film holder appears. Load and insert
the holder following the instructions in the loading a film
holder section of the hardware manual.
If an optional APS adapter is used, an index scan will be
made and the next window is skipped. The APS auto-detect
function automatically sets the film type between color and
black and white, and positive and negative.
When scanning 35mm film, click the
appropriate button to specify the film
type; film for slides is positive film, and
film for prints is negative film. The bor-
der of the film-type button is highlighted
to indicate the selection. Click the next
button to begin an index scan.
Film-type buttons
11