Advertisement
1 About this guide
This guide provides instructions for installing the Rosemount 326,
327, and 1408 transmitters with G1 process connectors using a
weld-in adapter (part number FB-1041).
1.1 Safety instructions
Follow these guidelines to ensure safe use and extend the life of the
product.
CAUTION
•
Read this document before using the product and keep it during
the entire service life.
•
The product must be suitable for the corresponding applications
and environmental conditions without any restrictions.
•
Only use the product for its intended purpose.
•
If the operating instructions or the technical data are not adhered
to, personal injury and/or damage to property might occur.
•
The manufacturer assumes no liability or warranty for any
consequences caused by tampering with the product or incorrect
use by the operator.
•
Installation, electrical connection, set-up, operation and
maintenance of the product must be carried out by qualified
personnel.
1.2 Hygienic adapter O-ring
The adapter comes with an EPDM O-ring. More O-rings are available
as accessories. See each product's
information.
2
Product Data Sheet
for more
Advertisement
