6. Wireless Belt Pack Transmitter (Optional) Parts and Specifications
Wireless Belt Pack Transmitter (Optional) (UHF 3V)
(4)
1. Open the battery cover (6) and insert 2 x "AA" batteries according to the polarity indicated
with + or -.
2. Turn ON POWER switch (1). The POWER LED indicator (2) will turn green, indicating
good battery voltage.
3. Plug in lapel microphone into MIC IN (3).
Wireless Belt Pack Transmitter (Optional) Specifications
Frequency
Spurious Emissions
Power Source
Operating Time
On-board Indicators
Weight
(1) ON/OFF Power
(2)
(2) Power LED Indicator
(1)
(3) MIC IN
(3)
(4) Antenna
(5)
(5) Belt Clip
(6) Battery Compartment/Cover
(6)
UHF 902MHz~928MHz
>55dBm
2 x "AA" 1.5V Batteries (included)
Approx. >6 Hours
Off/ On
0.22 lbs
11