Table of Contents
Advertisement
7. In a dry environment, undo the black handles and remove the clear battery cover. This has been designed to be
a tight fit to stop water ingress. Insert the two batteries and push home, they click in place. Turn the batteries on –
one short press to check the battery level and then a long press to activate them. Check the clear battery cover for
dirt and clean if necessary and re-grease. Replace the battery cover making sure the arrow on the cover is pointing
towards the sky, it is keyed and can only go on one way. Lock the handles in place and visually check all seals
through the clear battery cover. Clean if necessary.
A
NOTE: Only use batteries that have similar charge levels.
NOTE: Both batteries need to be installed.
NOTE: Check the O-Ring seals and re-grease if necessary.
NOTE: When activated, battery will chime and LED lights will turn green.
10
Advertisement
Table of Contents
