Cleaning The Oven Lamp - Beko BBIE22300XFP User Manual

7.8 Cleaning the Oven Lamp

In the event that the glass door of the oven
lamp in the cooking area becomes dirty;
clean using dishwashing detergent, warm
water and a soft cloth or sponge and dry
with a dry cloth. In case of oven lamp failure,
you can replace the oven lamp by following
the sections that follow.
Replacing the oven lamp
General Warnings
• To avoid the risk of electric shock before
replacing the oven lamp, disconnect the
product and wait for the oven to cool. Hot
surfaces may cause burns!
• This oven is powered by an incandescent
lamp with less than 40 W, less than 60
mm in height, less than 30 mm in dia-
meter, or a halogen lamp with G9 sockets
with less than 60 W power. Lamps are
suitable for operation at temperatures
above 300 °C. Oven lamps are available
from Authorised Services or licensed tech-
nicians. This product contains a G energy
class lamp.
• The position of the lamp may differ from
that is shown in the figure.
• The lamp used in this product is not suit-
able for use in the lighting of home rooms.
The purpose of this lamp is to help the
user see food products.
• The lamps used in this product must with-
stand extreme physical conditions such as
temperatures above 50 °C.
If your oven has a round lamp,
a. Disconnect the product from the electri-
city.
b. Remove the glass cover by turning it
counter clockwise.
c. If your oven lamp is type (A) shown in the
figure below, rotate the oven lamp as
shown in the figure and replace it with a
new one. If it is type (B) model, pull it out
as shown in the figure and replace it with
a new one.
d. Refit the glass cover.
If your oven has a square lamp,
a. Disconnect the product from the electri-
city.
b. Remove the wire shelves according to
the description.
c. Lift the lamp's protective glass cover with
a screwdriver.
d. If your oven lamp is type (A) shown in the
figure below, rotate the oven lamp as
shown in the figure and replace it with a
new one. If it is type (B) model, pull it out
as shown in the figure and replace it with
a new one.
EN / 37