Table of Contents
Advertisement
1.
Introduction
1.1
Audience
This manual provides information related to the
installation and operation of the Retrofi t Ohmeda
Gas Control Panel system manufactured by
BeaconMedæs. Service information contained in
this manual is intended for use by technicians or
personnel qualifi ed to repair and service medical
gas equipment.
1.2
Abbreviations
CGA
Compressed Gas Association
FNPT
Female National Pipe Thread
MNPT
Male National Pipe Thread
PSIG
Pounds Per Square Inch- Gauge
DISS
Diameter-Index Safety System
1.3
Defi nition of Statements
Statements
in
this
following words are of special signifi cance.
WARNING: Means there is a possibility of
injury or death to yourself or others.
CAUTION: Means there is a possibility of
damage to unit or other property.
NOTE: Indicates points of particular interest for
more effi cient and convenient operation.
1.4
Environmental Declarations
When
developing
BeaconMedæs tries to understand, address, and
minimize the negative environmental effects
that the products and services may have, when
being manufactured, distributed, and used, as
well as at their disposal.
Recycling and disposal policies are part of the
development of all BeaconMedæs products.
BeaconMedæs company standards determine
strict requirements.
When
selecting
materials,
recyclability, the disassembly possibilities and
the separability of the materials and assemblies
manual
preceded
products
and
services,
the
substantial
Wall Mount Gas Control Panels
are considered as well as the environmental
perils and dangers to health during the recycling
and disposal of the unavoidable rates of non-
recyclable materials.
BeaconMedæs products for the most part
consist of metallic materials that can be
remelted in steelworks and smelting works and
that is therefore almost infinitely recyclable. The
plastic use is labeled; sorting and fractioning
of the materials for recycling in the future is
foreseen.
Disposal of Materials
Dispose contaminated substances and materials
separately,
according
environmental legislations.
Dispose all components according to the
applicable disposal regulations.
NOTE:
by
This concept can only succeed with your help.
Support us by disposing professionally.
By assuring a correct disposal of the product
you help to prevent possible negative
consequences for environment and health
that can occur with inappropriate waste
handling.
Recycling and re-usage of materials helps to
preserve natural resources.
1.5
About Gas Control Panels
BeaconMedaes Wall Mount Panels
The BeaconMedaes gas control panel is designed
to update old style Ohmeda control panels sold
prior to 1996 (0221-5126-800). The kit contains
all required parts and can be installed with no
modifications to the old control panels rough-in
box. Brazing or otherwise disturbing the wall is
not required.
The gas control panel has been cleaned, tested
and prepared for gas service in accordance with
recommendations set forth in the National Fire
Protection Association (NFPA 99), "Standard for
Health Care Facilities."
1
to
local
applicable
4107 9027 47.00
Advertisement
Table of Contents
