Quality Tab; Version Tab; Limitations On Printer Driver Functions Installed With Point And Print - Konica Minolta Magicolor 5550 User Manual

Print the watermark on only the first page
Print the watermark repeatedly throughout the all pages (PostScript
printer driver only)

Quality Tab

The Quality Tab allows you to
Switch between color and grayscale printing
Control the darkness of an image (Brightness)
Specify the printer color settings (Quick Color)
Specify the resolution for the printout
Perform color separation
Select whether or not economy printing is used
Set the edge strength to Low, Middle or High
Turn on/off glossy mode
Specify the format of fonts that are to be downloaded
Print using the printer's fonts
Control the tones of an image (Contrast) (PCL printer driver only)
Specify the image compression method (PCL printer driver only)

Version Tab

The Version Tab allows you to view information about the printer driver.
Limitations on printer driver functions installed with
Point and Print
If Point and Print is performed with the following server and client combina-
tions, there are limitations on some printer driver functions.
Server and client combinations
Server: Windows Server 2003/XP/2000
Client: Windows NT 4.0
Functions with limitations applied
Booklet, Skip Blank Pages, Front Cover Page, Back Cover Page, Separa-
tor Page, Create Overlay, Print Overlay, Watermark
*JOBNAME, USERNAME, and HOSTNAME output of PJL
When using these operating system combinations, install the printer driver on
the client with a local connection, and then specify the shared printer installed
on the server as the connection.
22 Using the Postscript and PCL Printer Driver