This message...
TRANS. BELT
END OF LIFE
TRANS.ROLLER
END OF LIFE
UNABLE TO
COLLATE JOB
WASTE TONER
NEAR FULL
HUBS
NOT SUPPORTED
DEVICE
NOT SUPPORTED
9-40
means...
The transfer belt unit
has reached the end
of its life.
The transfer roller has
reached the end of its
life.
The hard disk is full.
Print jobs over 10,000
pages cannot be col-
lated.
The waste toner bot-
tle is nearly full.
A USB hub is con-
nected.
An incompatible
device is connected.
Status, Error, and Service Messages
do this...
Replace the transfer belt
unit and reset the
counter in the
MAINTE-
NANCE MENU/SUP-
PLIES/REPLACE/
menu.
TRANS. BELT
Printing can
continue,
however, the
printing result are
not guaranteed.
Replace the transfer
roller and reset the
counter in the
MAINTE-
NANCE MENU/SUP-
PLIES/REPLACE/
TRANS. ROLLER
menu.
Printing can
continue,
however, the
printing result are
not guaranteed.
Print one copy of the file
at a time.
Prepare a new waste
toner bottle.
Do not connect a USB
hub.
Do not connect an
incompatible device.