Control Voltage; Editing A Knob - Akai MPK mini plus User Manual

To change the pad colors, click the Colors tab next to MIDI at the top of each Pad bank to open
the colors page. Click the color block below Off Color to open the color pallete and select the color
you wish the pad to appear while in the Off position. Click the color block below On Color to choose
the color you wish the pad to appear while in the On position. These settings will be saved along
with sound settings when you save a preset, and pad backlights will display in these colors when
that preset is loaded on your MPK mini Plus.

Control Voltage

To edit the Control Voltage (CV) functions, click the fields to the right of to each function to open
the drop-down menu, then click on your desired setting to select it.
For descriptions of these functions, consult the table under

Editing a Knob

You can edit settings for each of the 8 Knobs on MPK mini Plus, including CC message, minimum
value, and maximum value. You can also set the channel through which all the knobs send MIDI
data.
To edit the name of a knob, click the text field above the knob and type in the
desired name.
To set the mode of a knob, click the text field just below the knob and select
Absolute or Relative. In Absolute mode, the CC value corresponds directly to
knob position on the MPK. In Relative mode, knob position corresponds to a
particular knob position in your DAW, meaning the CC value will be relative to
that setting.
To select the CC value a knob sends, click the CC field under a knob and then
type the desired CC number (0 – 127).
To select a knob's minimum and maximum values, click the Min field
(minimum) or Max field (maximum) under a knob and then type the desired value
(0 – 127).
Operation > CV Setup.
21