About This Guide; Product Overview - D-Link DGS-6604-SK Quick Installation Manual

About This Guide

This guide contains step by step instructions
for setting up the D-Link DGS-6600 series
chassis-based switch. Please note that the
model you have purchased may appear
slightly different from those shown in the
illustrations.
Please read this manual carefully before using
the product, paying special attention to safety
warnings so as to avoid injury or damage to
equipment.
This manual is intended for users who have
experience in installing and maintaining
network hardware, and assumes that users
are familiar with standard networking terms
and concepts.

Product Overview

D-Link's DGS-6600 series chassis-based
switch is an intelligent and high-performance
multi-layer LAN device designed for
enterprise campus and metropolitan area
networks (MAN). It is ideal for deployment in
environments where uninterrupted network
applications and a high level of performance,
security and control are required.
Featuring flexible modular architecture and
industry standard compliance, the switch
provides scalable expansion and a high
level of investment protection for businesses
and telecom carriers to deploy Gigabit and
10-Gigabit packet switching and routing for
office networking and Ethernet-based Internet
services to homes.
DGS-6604 provides totally four slots including
one slot for CM module.
2 u
Warning s
Power Supply Safety Warning
Ground the device before power-
ing on to guard against power
surges.
Be sure that all cables are ground-
ed correctly.
Static Electricity Protection
Warning
Always wear an anti-static wrist
strap when contacting the chassis
to prevent static damage.
Laser Safety Warning
CLASS 1 LASER PRODUCT
Directly looking at the optical in-
terface or optical fibers may cause
eye damage.
Fan Safety Warning
The fan mechanism is dangerous.
Avoid touching the area near the
fan.
Transportation Safety Warming
The device and components may
comprise more than 27 kg in total.
Use care when inserting or
removing heaving components.
Maintenance Warning
Maintenance should only be car-
ried out by qualified service techni-
cians