Table of Contents
Advertisement
Default installation Orientation:
DOS's position
a) The DOS has an arrow printed on the top of it. Orientate the arrow towards the front of the craft (i.e.
direction of flight).
b) When installing, please keep the DOS horizontal and as close as possible to the "Centre of gravity" (COG)
of the aircraft.（as the following diagram.）
c) Also should keep the DOS in the horizontal level when the plane steady and straight flight,especially for the
plane with attack horn.it will be better to bed hedgehopping of its back to keep it in a horizon level.
d) It may happen the following deviation problems if the installation has deviation. If it has a little deviation,
operator can leveling the plane by adjusted Remote Control stick under the stabilized mode.
Plane roll remains level when in Auto Stabilization Mode
Plane nose will pitch down when
in Auto Stabilization Mode.
Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd.
Plane will roll to
the right when in
Stabilized Mode
DOS
Plane nose pitches up when
in Auto Stabilization Mode.
DOS
http://www.feiyu-tech.com
Page 11
Plane will roll to
the left when in
Stabilized Mode
Plane pitch
remains level
when in Auto
Stabilization
Mode
service@feiyu-tech.com
Advertisement
Table of Contents
