4.
USING SC-110 AS A SCANNER
To run SC-110 at optimum speed, the following minimum
requirements are recommended:
IBM compatible PC 386/486, Pentium or later;
Microsoft Windows 95/98, Windows NT;
One printer port available: EPP(enhanced parallel port);
20 Megabytes of available hard disk space for
installation;
16 Megabytes of RAM (32 Megabytes or higher
recommended);
A video graphics array (VGA) monitor;
A Microsoft Windows-compatible pointing device (e.g.,
mouse);
A CD ROM drive.
4.1
INSTALLATION PROCEDURE
Installation procedures of SC-110 driver are as follows:
1. Start Windows 98, Windows 95, or NT
2. Insert the SC-110 Utilities CDROM into your CDROM
drive.
4-1