QMS SC-110 User Manual page 15

Tips:
To use other settings than the one displayed in the Message Display
window, simply repress the button of that setting to select other options.
(For example, when you choose paper size with the Paper Size button, if
the Message Display window shows A4 and you prefer Letter, you can just
press the Paper Size button again until Letter is displayed.)
Note:
(1). An item message in the Message Display Windows ending with a " "
means the last setting.
(2). The default settings are: A4 Size, Normal Print Quality, 100% ratio, 1
copy.
IMPORTANT!
PRINTER MEMORY
To make good use of SC-110, it is recommended to install at least 4 MB of
memory in your printer. If you want to print your document using Quality
mode - 600 dpi as your Copy Quality mode, you need more RAM for your
printer as using this feature requires more processing time and memory.
See the following chart for printer memory recommendations.
It is strongly recommended that you refer to the following table to ensure a
successful color copy.
Copy Quality Document Size
Normal Letter Size
Legal Size
Quality Letter Size
Legal Size
If there is not enough memory in your printer, you may probably encounter
either the printer does not print or the print quality is bad.
Minimum Memory
1MB
2MB
4MB
6MB
3-3
Recommended Memory
4MB
8 MB
16MB
20MB