QMS SC-110 User Manual page 17

Customizing copying features:
SC-110 supports a variety of copying features to meet many copying
purposes.
Specifying a printer model is required before customizing copying features.
To specify a printer model,
1. Press Menu button to display the first copying feature, Printer Select.
2. Press Select and then
models included.
3. Press Select button once again to specify one of printer models,
connected to SC-110. An asterisk will appear next to the printer model
name.
Note: If the printer model connected to SC-110 is not any of QMS
Print or PageWork systems currently supported, specify PCL
Emulation.This is a generic printer model that will work with
most laser printers that support the PCL Emulation. However,
you may lose the ability to select other options.
The following steps depict the procedures of how to configure all other
copying-feature combinations after a printer model is specified.
1. Press Menu and then the
feature. Press Select.
2. Press the
Select.
3. Repeat step 1 to 2 to set up the other desired copy-feature preference
options.
or
or
or button until the desired option is displayed. Press
button to respectively display printer
button to display the desired copy
3-5