Table of Contents
Advertisement
Quick Note of copy-feature terms:
1.
Duplex button: Double-sided copying is available when the original is
fed only through ADF of SC-110.
Off
Long/On
Short/Tumble
2.
Offset Stacking: If the output bin selected supports offset stacking,
then the output jobs will be offset from each other when enabled.
Off
On
3.
Staple: If the output bin selected supports stapling of jobs, the
enabled job will be stapled when the original is fed only through ADF
of SC-110.
None
Front Corner
Back Corner
Center
single-sided copying
double-sided copying:
The reverse-page content
starts being copied from the
left edge.
double-sided copying:
The reverse-page content
starts being copied from the
top edge.
Copying jobs stack normally.
Each copying job is offset in
an output bin.
Pages are not stapled.
Pages are stapled at the front
corner.
Pages are stapled at the back
corner.
Pages are stapled at two
points in the center.
3-7
Advertisement
Table of Contents
