Tips On Rear Panel Connections - Hitachi 50EX13KA Operating Manual

REAR SPEAKER TERMINAL CONNECTIONS
below the button. When the button is released, the wire is locked into place. In the same
manner, press the Right Speaker black button and insert the negative (-) lead wire.
Repeat this procedure for the Left Speaker.
CAUTION: Do not connect Speakers simultaneously to the REAR
SPEAKER terminal of the Projection TV and an external amplifier. This could damage both
the TV and the speakers. Your TV was designed to use 8 Ohm speakers only. Any other
type may degrade the audio performance of your entertainment system.

TIPS ON REAR PANEL CONNECTIONS

The S-Video connection is provided for high performance laser discs, VCR's, etc., that
have this feature. Use this connection in place of the standard video connection if your
device has this feature.
If your device has only one audio output (mono sound), connect it to the left audio jack
on the TV.
Refer to the operating guide of your other electronic equipment for additional
information on connecting your hook-up cables.
A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record
its own video or line output (INPUT: 1 in the example on p. 11). Refer to your VCR
- 16 -