Connecting To Power Supply - Bofa AD1500 iQ User Manual

Installation
4
02
Specification
Dimensions: Height 1201mm Depth 801mm Width 626mm
Weight: 160Kg
Voltage: 230v
Frequency: 50/60Hz
Full load current: 24.0A
Power: 3300w
3
Capacity: 1250m /h
Connection to Power Supply
Please follow the above specification when selecting the
power supply outlet for the iQ system, ensure the power
supply is suitable before connecting the iQ system.
Check the Integrity of the electrical power cable, if the
supply cord is damaged the extraction unit should not be
connected to the mains. The supply cord should only be
replaced by a BOFA engineer as an electrical safety test may
be required after replacement.
The iQ system MUST be connected to a properly
earthed outlet.
If your iQ system was ordered with any optional
extras please read section
connection is made as additional connections may be
required before power is connected to the extractor.
Connect the power cable to an isolated electrical supply.
The mains socket should be installed near the extractor it
should be easily accessible and able to be switched On/ Off.
The cable run should be arranged so as not to create a trip
hazard.
4.03 before the power