Connecting To A Detected Network Manually - Canon WFT-E8A Instruction Manual

Connecting to a Detected Network Manually

The instructions in this chapter are continued from page 27.
Establish a connection by selecting the SSID (or ESS-ID) of the access
point to connect to from a list of active access wireless LAN terminals
nearby.
Selecting the Access Point
(1)
(1) SSID
(2) An icon is displayed if the access point is encrypted
(3) Channel used
[Refresh] and [Manual settings]
Scroll down the screen in step 1 to display [Refresh] and [Manual

settings].
To search for access points again, select [Refresh].

To configure settings for the access point manually, select [Manual

settings]. Enter the SSID using the virtual keyboard and then
configure settings following the instructions displayed.
Select an access point.
1
(2) (3)

Turn the <5> dial to select the
access point to connect to from the
list of access points.
31