Front Panel; Paging Tab; Zone Selection; Source Selection - 4EVAC 4E-CMT Installation And User Manual

Hacousto Holland bv
Industrieweg 87
2651BC Berkel & Rodenrijs
4E-CMT installation and user guide

5. Front Panel

NOTE: 4E-CMT does not support emergency mode. Evacuation features are not available for this device.
As long as the system is activated in voice alarm condition (EVAC mode), all general paging features are
also not accessible.

PAGING tab

Zone
selection

5.1.1. Zone selection

In order to start paging / message, first select a zone or group of zones on the left section of the screen.
If there are more than 6 zones accessible, use the scroll "arrow" button to scroll through pages with zone
selection.

5.1.2. Source selection

Next, on the right section of the screen, select the source to be transmitted to the selected set of zones.
Once selected, the source will be immediately routed to destination zones.
If there are more than 6 sources accessible, use the scroll "arrow" button to scroll through pages with source
selection.
Page 9 of 13
Author:
Source
selection
DD