Configuration Settings - 4EVAC 4E-CMT Installation And User Manual

Hacousto Holland bv
Industrieweg 87
2651BC Berkel & Rodenrijs
4E-CMT installation and user guide
Important note: Access level 3 explanation
Opening the device housing or tampering with the network cabling is
restricted. This gives access to all interfaces, internal system
connections and sensitive hardware settings that are of high
importance to system operation mode, hardware reliability and safety
(Access Level 3 according to EN54-16, Annex A). This access level (and
higher) is strictly protected by the manufacturer and reserved only for
service personnel which is trained, approved and officially certified by
the manufacturer. Any actions carried out in Access Level 3 without the
manufacturer's explicit approval may lead to incorrect settings or
hardware damage, causing serious system malfunction, and therefore
are strictly prohibited and void manufacturer's warranty.

3. Configuration settings

Settings for the 4E-CMT are included in the configuration file located on the micro SD memory card
installed in the 4EVAC system main unit.
This configuration file includes user-defined settings, such as:
- zone selection buttons;
- sources available for audio routing (BGM inputs, general purpose messages);
- microphone volume level,
- TALK button mode (PTT/toggle), etc.
The configuration file should be prepared in 4EVAC Manager. 4EVAC Manager is GUI software running on
Windows OS. More information about 4EVAC Manager can be found in the software manual "4EVAC
Manager guide".
NOTE: Please make sure that the configuration file is prepared with the version of 4EVAC Manager
compatible with the firmware version of the system.
The installation file of the latest 4EVAC Manager and the manual are available at our website
www.4EVAC.com
Page 4 of 13
Author: DD