Troubleshooting - Minolta Dimage E201 Instruction Manual

Konica minolta dimage e201: instruction manual
Hide thumbs Also See for Dimage E201:
Table of Contents

Advertisement

TROUBLESHOOTING - Recording Mode
To record images, the camera must be on. Use the lens cover slide to open the lens
cover and turn on the camera. The LCD monitor automatically activates; it can be
turned off by pressing the display/enter button.
Problem
Nothing dis-
The camera will
played on the
not work.
data panel or the
LCD monitor.
"CF" displayed
on the data
panel. "No card"
appears on the
LCD monitor.
Shutter will not
release.
Zero displayed
on the frame
counter of the
data panel. "Card
full" appears on
the LCD monitor.
Symptom
The camera is off.
Auto-power-off function
has shut off the camera
The batteries are dead.
The batteries are inserted
incorrectly.
The AC adaptor is not
connected properly.
No CompactFlash card in
the camera.
CompactFlash card is full
and unable to store an
image at the image-quality
or image-size setting on
the camera.
Cause
- 89 -
Solution
Turn on the camera by
moving the lens-cover slide
so that the lens is visible
(p. 15).
Turn the camera off and
then on using the lens-
cover slide near the lens
(p. 21).
Replace batteries
(p. 20).
Reinsert the batteries tak-
ing care that the negative
and positive terminals are
orientated as indicated on
the inside of the battery
chamber door (p. 20).
Check that the adaptor is
connected to the camera
and a live electrical outlet
(p. 22).
Insert a CompactFlash
card (p. 23).
Insert a new
CompactFlash card
(p. 23, 24).
Delete some images from
the CompactFlash card (p.
62).
Change the camera's
image-quality or image-
size setting (p.44 - 47).

Advertisement

Table of Contents
loading

Table of Contents