Viewing Images On A Television - Minolta Dimage E201 Instruction Manual

VIEWING PICTURES

VIEWING IMAGES ON A TELEVISION

It is possible to view camera images on your television. The camera has a video out
terminal which can be used to connect the camera to a television using the supplied
video cable. The camera is compatible with the NTSC and PAL standards. The video-
out setting can be checked and set on the setup menu (p. 71 - 75).
Turn off the television and the camera.
Insert the mini plug end of the video cable into the camera's video-out
terminal.
Plug the other end of the video cable into the video-input terminal on the
television.
Turn the television on.
Turn the camera's function dial to single-frame playback, index playback,
movie playback, or slide show.
Press and hold the display/enter button to set the camera in playback mode.
• The camera's LCD monitor will not activate when the camera is attached to a
television. Listen for the beep that indicates the playback mode has activated. If
the beep has been turned off, use the setup menu to turn it on again (p. 72).
Change the television to the video channel.
• The camera's playback-mode display will be visible on the television screen.
View the images as described in the playback section (p. 52, 53), the slide-
show section (p. 56), or the movie-playback section (p. 58).
- 60 -