Table of Contents
Advertisement
Manual image setup
If automatic image setup does not establish the image that you prefer, perform manual image
setup.
Note: Have your monitor powered on for about 15 minutes, until the monitor warms up.
1. Press
at the bottom of the monitor to open the OSD menu.
2. Use
or
to select
3. Use
or
to select Image Setup and press
4. Use
or
to select Clock and Phase adjustment.
Clock (pixel frequency) adjusts the number of pixels scanned by one
Horizontal sweep. If the frequency is not correct, the screen shows vertical
Stripes and the picture does not have the correct width.
Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the picture has horizontal disturbances in light picture.
5. When the image no longer looks distorted, save the Clock and Phase adjustments.
6. Press
to leave the OSD menu.
and press
to access.
to access.
Chapter 3 Reference information 3-5
Advertisement
Table of Contents
