Countdown Mode - HPM Slimline D810SLIMDP Instruction Manual

Countdown Mode

F
Countdown Mode lets you set up a delayed ON or
OFF switching. It's a bit like a kitchen timer, except
instead of an alarm ringing when the clock reaches
zero, the timer switches power ON or OFF.
(i) Before setting the Countdown time choose
whether you want to turn power ON or OFF
after the time has elapsed:
• In Clock Mode: use the UP button to switch
the timer to ON or AUTO ON for a delayed
switch OFF
• In Clock Mode: use the UP button to switch
the timer to OFF or AUTO OFF for a delayed
switch ON
(ii) Press MENU twice to scroll to Countdown Mode.
The letters CTD will show on the display above the
seconds.
(iii) The display shows 0:00:00 and the hour position will flash. Use the UP
and DOWN buttons to set the hour (0- 99). Press OK – the minutes
position will flash.
(iv) Use the UP and DOWN buttons to set the minute (0-59). Press OK – the
seconds position will flash.
(v) Use the UP and DOWN buttons to set the seconds (0-59). Press OK.
(vi) The timer will start to count down straight away and the letters CTD will
flash. After 2 minutes the display will return to Clock Mode. Countdown
Mode overrides the programmed settings and Random Feature.
(vii) To cancel the Countdown scroll to the Countdown Mode display and
press RCL. Hint! Pressing the RCL button in Clock Mode will adjust
between Standard and Daylight Savings Times – you must return to the
Countdown Mode display to cancel the Countdown.
WE
10:59
+1h
25
ON
MENU
0:00
OTD
+1h
00
ON
OK
MENU
UP
DOWN
UP