HPM Slimline D810SLIMDP Instruction Manual page 5

setting the time you want your device to switch ON.
In this example press the UP button until 17:15 is displayed.
(viii) Press OK to confirm. The number 1 and ON will flash.
(ix) Press the UP arrow to move to the Program 1 OFF setting. Press OK to
enter the program setting procedure. The day setting will flash.
(x) Use the UP and DOWN buttons to choose which days of the week you
want the timer to switch OFF. This will probably match your settings in
Program 1 ON, but if you want your timer to remain ON overnight,
remember to choose a setting that corresponds to the following day of
the week. Press OK to confirm, the hour will flash.
(xi) Use the UP and DOWN buttons to choose the hour you want your device
to switch OFF. To set the OFF time to be 7:05pm, press the UP button
until 19:00 is displayed. Press OK to confirm and the minute setting
will flash.
(xii) Use the UP and DOWN buttons to finish setting the OFF time.
In this example press the UP button until 19:05 is displayed. Press OK
to confirm.
(xiii) Press MENU twice to return to clock mode or use the UP and DOWN
buttons to scroll to other program settings if more are required.
Activate the Timer and Timer Override
D
To have the timer automatically operate your
device the word AUTO must be displayed when in
Clock Mode.
Press the UP button to scroll through 4 options:
- ON: power is available to your device at all times.
This is the same as leaving your device plugged
in at the wall.
WE
10:59
+1h
25
ON
MENU
UP