Table of Contents
Advertisement
Setting the signal and current
en
Pour out the condensation water.
2.
Caution!
Dirty condensation water may be
harmful to your health and cause
material damage.
Condensation water is not suitable
for drinking and may be
contaminated with fluff. Do not drink
the condensation water or reuse it.
Push in the condensate container
3.
until you feel it lock back into place
in the dryer.
30
M
Setting the signal and
current
Y ou can change the following settings:
S e t t i n g t h e s i g n a l a n d c u r r e n t
The spin speed that was used for
■
spinning in the washing machine;
used exclusively to more accurately
display the anticipated drying time,
the volume of the audible signal at
■
the end of the programme,
the volume of the audible button
■
signals,
the current rating for your dryer's
■
fuse (10 A or 13 A).
The values for the energy
Note:
label are determined using a circuit
breaker/fuse rating of 13 A. If the
circuit breaker/fuse rating is
changed to 10 A, the drying time
and energy consumption will be
higher. You can find details on this in
the consumption values table.
~ Page 37
You will need to activate setting mode
before you can change these settings.
Advertisement
Table of Contents
