Nokia N86-1 User Manual page 146

To avoid selecting which access point to use every time
the device attempts to connect to a network, you can
create a group that contains various access points, and
define the order in which the access points are used to
connect to a network.
For example, you can add wireless LAN (WLAN) and
packet data access points to an internet access point
group and use the group for browsing the web. If you
give the WLAN access point the higher priority, the
device connects to the internet through a WLAN if
available and through a packet data connection if not.
To create a new access point group, select
Manage New
>
To add access points to an access point group, select
the group and Options
an existing access point from another group, select the
group, scroll to an existing access point, and select
Options Organise
>
To change the priority order of access points within a
group, scroll to an access point and
Organise Change
>
Packet data access points
Select Menu Tools
>
Destinations
>
instructions on the display. Or, open one of the access
point groups, select an access point marked with
146
and select Edit.
destination.
New access point. To copy
>
Copy to other dest..
>
Options
priority.
Settings and Connection
>
Access point, and follow the
Use the instructions provided by your service provider
to edit the following:
Access point name
●
provided by your service provider.
User name
●
make a data connection, and is usually provided by
your service provider.
Prompt password
●
to ask for a password every time you log in to a
server, or if you do not want to save your password
in the device, select Yes.
Password
●
Options
>
a data connection and is usually provided by your
service provider.
Authentication
●
your password encrypted or
password encrypted when possible.
Homepage
●
you are setting up, enter the web address or the
address of the multimedia message centre.
Use access point
●
>
set the device to ask for confirmation before the
connection using this access point is created, or
Automatically
destination using this access point automatically.
>
Select Options
following:
,
— The access point name is
— The user name may be needed to
— If you want to set the device
— A password may be needed to make
— Select Secure to always send
Normal
— Depending on the access point type
— Select After confirmation
to set the device to connect to the
Advanced settings
>
to send your
to
and from the