Table of Contents
Advertisement
Loosen up clothes that have undergone spinning (loose spinning)
After spinning is complete, loosening operations will be performed (2~4 minutes), which will allow clothes to be removed more easily.
2 〜 4
Programs that cannot be configured
"Blanket" and "Air Jet" programs
Factory settings: "set" If you need to change the settings
1
Press
to power on the machine
2
Press
for 3 seconds or more
3
You will hear a "beep" sound. Continue pressing.
A configuration complete indication will be displayed and the
user will be notified via a sound.
3
Press
to cut off power
The changed settings will be saved even when the power is cut off.Use the same steps to change the settings.
When there is a large load (approx. 6kg or more), the machine may not be able to perform loosening.
6kg
If you start from rinsing or spinning, the machine will not perform loosening.
Extending the rotation, water insertion, and rinsing durations
The rotation, water insertion, and rinsing durations can be extended.(45 seconds each time)
45
The rotation, water insertion, and rinsing program performs their respective operations for 45 seconds (twice).
1
45
Programs that can be configured
"Normal" program operation
Factory settings: "not set." If you need to change the settings
1
Press
to turn on the power
2
Press
for 3 seconds or more
3
A configuration complete indication will be displayed and
the user will be notified via a sound.
3
Press
to cut off power
The changed settings will be saved even when the power is cut off. Use the same steps to change the settings.
2
Set
You will hear a "beep"
(factory settings)
sound as a notification
You will hear a "beep"
No settings
sound as a notification
Not set
You will hear a "beep"
(factory setting)
sound as a notification
You will hear a "beep"
Set
sound as a notification
49
Advertisement
Table of Contents
