Advertisement
Step 1 Align the legs to the pre-drilled holes at the bottom of the units, insert bolts and washers
then tighten with Allen Key. Rotate support leg Q to tighten it.
Step 2 Align and insert the back rest to the positon shown in drawing, push to the end to secure it.
Step 3 Align the entire back cushions to the back rest, attach to the Velcro, adjust and fix it properly.
I
Care instruction for PU furniture.
In order to maintain the original appearance of your PU furniture, please follow below simple care procedures:
Avoid exposing furniture directly to sunlight or heating and air conditioning outlets.
Sunlight and/or exposure to heating and air conditioning outlets will fade/damage PU.
Do not place your PU furniture too close to windows, radiators, or vents, and be sure to
use windows, radiators, or vents.
Vacuum or wipe with a cloth regularly to remove dust.
For items use on wooden floor, hard surfaces or carpets, it is recommended to install
protective pads under all legs and supports to avoid/prevent from damages/scratches
and
discoloration.
OL
N
N
OR
N
Advertisement
