Table of Contents
Advertisement
11.5. Software update
HOME A "Setup" A "
This unit lets you update the software yourself using a software update disc or USB memory stick, or via the
Internet.
The available discs are below:
• BD-RE/-R
• DVD-RW/-R
• CD-RW/-R
C Disc / USB memory stick update
You can update the software by using a disc or USB memory stick.
Prepare a blank disc or USB memory stick for software update:
Navigate to www.sanyo-av.com website, and download the latest software version to a blank disc or USB
memory stick using a PC by following the directions described on the website.
• Use a blank disc or USB memory stick, download one software update per disc or USB memory stick. Write
the software into the root directory of the disc or USB memory stick.
• For more details on how to download the software, please refer to the website.
1. Insert the disc or connect the USB memory stick for software update.
• If a disc is inserted, the file list will appear. Press [HOME].
• After connecting a USB memory stick, wait 10-20 seconds, then move on to step 2.
2. Use [
3. Use [
] to select "
4. Use [
] to select "System", then press [OK].
5. Use [
] to select "Software Update", then press [OK].
6. Use [
] to select "Disc" or "USB memory stick", then press [OK].
• This unit now starts loading the update file, then Installs it. Update will take a while. Leave the unit until it
automatically restarts.
7. After updating finishes, this unit will restart automatically. Remove the disc or USB memory stick from this
unit.
Caution
C
• Please Do Not Unplug the AC power cord, eject the disc or unplug the USB memory stick or press
[y(POWER)] on unit or remote to turn the unit to standby mode while performing a "Disc / USB memory
stick update".
Note
D
• Software update will not change any of the current settings.
EN
" A "System" A "Software Update"
] to select "Setup" in the home menu, then press [OK].
", then press [OK].
54
continued on next page
Advertisement
Table of Contents
