Specifications - Makita GCU01 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Overall length
(without guide bar and battery)
Rated voltage
Net weight
Standard guide bar length
Recommended guide
bar length
Applicable saw chain type
(refer to the table below)
Standard sprocket
Chain speed
Chain oil tank volume
• Due to our continuing program of research and development, the specifications herein are sub-
ject to change without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The light-
est and heaviest combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your
region of residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other
battery cartridges and chargers may cause injury and/or fire.
NOTE: We recommend using the recommended batteries to fully obtain the performance of this tool.
*1
*2
with 90PX
with 91PX
Number of teeth
Pitch
GCU01
D.C. 36 V - 40 V max
2.6 kg (5.7 lbs)
3.9 - 4.6 kg
(8.6 - 10.1 lbs)
300 mm
(12")
300 - 350 mm
(12" - 14")
90PX
91PX
(0 - 1,490 m/min)
(0 - 4,880 ft/min)
200 cm
BL4020 / BL4025* / BL4040* / BL4050F
* : Recommended battery
DC40RA / DC40RB / DC40RC
2 ENGLISH
GCU02 GCU03
266 mm
(10-1/2")
4.0 - 4.7 kg (8.8 - 10.4 lbs)
350 mm 400 mm
(14")
300 - 400 mm
(12" - 16")
6
3/8"
0 - 24.8 m/s
3
(6.8 fl oz)
(16")
-
90PX