Table of Contents
Advertisement
6.5 AirDry （自動風乾科技）
AirDry （自動風乾科技） improves the
drying results. The appliance door opens
automatically during the drying phase
and remains ajar.
AirDry （自動風乾科技） is automatically
activated with all programmes other than
預洗.
The duration of the drying phase and the
door opening time vary depending on the
selected programme and options.
When AirDry （自動風乾科技） opens the
door, the display shows the remaining
time of the running programme.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
7. BEFORE FIRST USE
1. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If
not, adjust the level of the water
softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start the programme 快速 to remove
any residuals from the manufacturing
process. Do not use detergent and
do not put dishes in the baskets.
After starting the programme, the
appliance recharges the resin in the
water softener for up to 5 minutes. The
CAUTION!
If children have access to
the appliance, we advise to
deactivate AirDry （自動風乾
科技） . The automatic
opening of the door may
pose a danger.
When AirDry （自動風乾科
技） opens the door, Beam-
on-Floor （地面投影顯示）
might not be completely
visible. To see if the
programme is complete, look
at the control panel.
6.6 Key tones
The buttons on the control panel make a
click sound when you press them. You
can deactivate this sound.
6.7 Latest programme selection
You can set the automatic selection of
the most recently used programme and
options.
The latest programme that was
completed before the appliance
deactivation is saved. It is then selected
automatically after you activate the
appliance.
When the latest programme selection is
disabled, the default programme is 節能.
washing phase starts only after this
procedure is complete. The procedure is
repeated periodically.
7.1 The salt container
CAUTION!
Use rough salt designed for
dishwashers only. Fine salt
increases the risk of
corrosion.
The salt is used to recharge the resin in
the water softener and to assure good
washing results in daily use.
ENGLISH
13
Advertisement
Table of Contents
