Before First Use - Electrolux ESA17210SW User Manual

AirDry is automatically activated with all
programmes other than
applicable).
The duration of the drying phase and the door
opening time vary depending on the selected
programme and options.
CAUTION!
Do not try to close the appliance door
within 2 minutes after automatic opening.
This can cause damage to the appliance.
If, afterwards, the door is closed for at
least 3 minutes, the running programme
ends.
CAUTION!
If children have access to the appliance,
we advise to deactivate AirDry. The
automatic opening of the door may pose
a danger.

7. BEFORE FIRST USE

1. Make sure that the current level of the
water softener agrees with the
hardness of the water supply. If not,
adjust the level of the water softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent and do not put dishes in the
baskets.
12 ENGLISH
How to deactivate AirDry
The appliance must be in programme
selection mode.
Make sure that the programme marker on the
knob is set to the on/off position.
1. To enter the user mode, press and hold
2. Turn the knob counterclockwise until the
(if
The indicator
3. Press
4. To confirm the setting, keep turning the
After starting the programme, the appliance
recharges the resin in the water softener for
up to 5 minutes. The washing phase starts
only after this procedure is complete. The
procedure is repeated periodically.
7.1 The salt container
Use only regeneration salt for
dishwashers. Do not use kitchen salt.
. At the same time turn the knob
counterclockwise until the programme
marker indicates the first programme.
Release when the indicators
on/off start flashing.
programme marker indicates the third
programme.
shows the current setting:
• is on = AirDry is activated.
• is off = AirDry is deactivated.
to change the setting.
programme knob until the programme
marker is back in the on/off position.
CAUTION!
and