Table of Contents
Advertisement
8.1 Using the detergent
A
B
C
CAUTION!
Only use detergent
specifically designed for
dishwashers.
1. Press the release button (A) to open
the lid (C).
2. Put the detergent (gel, powder or
tablets) in the compartment (B).
3. If the programme has a prewash
phase, put a small quantity of
detergent on the inner part of the
appliance door.
4. Close the lid. Make sure that the lid
locks into position.
For information about the
detergent dosage, refer to
the manufacturer's
instructions on the
packaging of the product.
Usually, 20 - 25 ml of gel
detergent is adequate for
washing a load with normal
soil.
The upper ends of the two
vertical ribs inside the
compartment (B) indicate
the maximum level for filling
the dispenser with gel (max.
30ml).
8.2 How to select and start a
programme using 時間選擇
selection bar
1. Slide your finger across 時間選擇
selection bar to choose a suitable
programme.
• The light related to the selected
programme is on.
• The 節能程度 indicates the level
of energy and water consumption.
• The display shows the
programme duration.
2. Activate applicable 附加功能 if
desired.
3. Close the appliance door to start the
programme.
8.3 How to select and start the
programme
1. To select
預洗, press and hold
for 3 seconds.
• The light related to the button is
on.
• The 節能程度 is off.
• The display shows the
programme duration.
2. Close the appliance door to start the
programme.
8.4 How to activate 附加功能
1. Select a programme using 時間選擇
selection bar.
2. Press the button dedicated to the
option you want to activate.
• The light related to the button is
on.
• The display shows the updated
programme duration.
• The 節能程度 indicates the
updated level of energy and water
consumption.
By default, options must be
activated every time before
you start a programme.
If the latest programme
selection is enabled, the
saved options are activated
automatically along with the
programme.
ENGLISH
15
預洗
Advertisement
Table of Contents
