Windows Xp; Windows Vista - Kodak EasyShare ESP 7 Start Here Manual

7
Installing Software on WINDOWS OS
WINDOWSWINDOWS
WINDOWSWINDOWS
WINDOWSWINDOWS
WINDOWSWINDOWS
WINDOWSWINDOWS
WINDOWSWINDOWS
WINDOWSWINDOWS
WINDOWSWINDOWS
WINDOWSWINDOWS
WINDOWSWINDOWS
WINDOWSWINDOWS
WINDOWSWINDOWS
WINDOWSWINDOWS
WINDOWSWINDOWS
WINDOWSWINDOWS
WINDOWSWINDOWS
Setting your KODAK All-in-One Printer as the default on your WINDOWS OS

WINDOWS XP:

WINDOWS VISTA:

10
a) Load the KODAK Inkjet Printer Software CD for
b) If instructed, connect the USB cable to the USB port
The User Guide is installed with your KODAK Inkjet
Printer Software and is located here:
Start
Start Printers and Faxes.
Right-click the icon for the printer you want to use as the default printer, and
then click Set As Default Printer.
Start Control Panel
Right-click on the printer you want to use, and then click Set As Default Printer.
www.kodak.com/go/aiosupport
WINDOWS
Do not connect the USB cable to the printer
until instructed during software installation.
WINDOWS OS into the CD-ROM drive. Follow the
on-screen prompts when the instructions appear.
If the KODAK Inkjet Printer Software installer window
does not open, click Start, then click Computer or My
Computer, and double-click on your CD-ROM drive.
on the printer and to your computer. Continue to
follow the on-screen prompts until installation is
complete.
NOTE: If you are prompted by your fi rewall during
software installation, be sure to allow access. For
additional information go to
www.kodak.com/go/inkjetnetworking.
NOTE: If you have additional computers on your
network, install the KODAK Inkjet Printer Software on
each computer.
Programs Kodak
Hardware and Sound
User Guide
Printers.