Care And Cleaning - Smeg ST4533IN User Manual

• The filters are clean and correctly
installed.
• The cap of the salt container is tight.
• The spray arms are not clogged.
• There is enough salt and rinse aid
(unless you use multi-tablets).
• The arrangement of the items in the
baskets is correct.
• The programme is suitable to the type
of load and the degree of soil.
• The correct quantity of detergent is
used.
Loading the baskets
• Always use the whole space of the
baskets.
• Use the appliance to wash dishwasher-
safe items only.
• Do not wash the following materials in
the dishwasher: wood, horn, pewter,
copper, aluminium, delicate
ornamented porcelain and unprotected
carbon steel. This can cause them to
crack, warp, discolour, pit or rust.
• Do not wash in the appliance items that
can absorb water (sponges, household
cloths).

CARE AND CLEANING

WARNING! Before any
maintenance other than
running the programme Self
Clean, deactivate the appliance
and disconnect the mains plug
from the main socket.
Dirty filters and clogged spray
arms negatively affect the
washing results. Check these
elements regularly and, if
necessary, clean them.
Self Clean
Self Clean is a programme designed to
clean the appliance interior with optimal
results. It removes limescale and grease
buildup.
• Put hollow items (cups, glasses and
pans) with the opening facing
downwards.
• Make sure that glasses do not touch
each other.
• Put light or plastic items in the upper
basket. Make sure that the items do not
move freely.
• Put cutlery and small items in the
cutlery drawer.
• Make sure that the spray arms can
move freely before you start a
programme.
Unloading the baskets
1. Let the tableware cool down before
you remove it from the appliance. Hot
items can be easily damaged.
2. First remove items from the lower
basket, then from the upper basket.
After the programme is
completed, water can still
remain on the inside surfaces
of the appliance.
When the appliance senses the need for
cleaning, the indicator
Self Clean programme to clean the
appliance interior.
How to start the Self Clean
programme
Before starting the Self Clean
programme, clean the filters
and spray arms.
1. Use a descaler or a cleaning product
designed specifically for dishwashers.
Follow the instructions on the
packaging. Do not put dishes in the
baskets.
2. Press and hold simultaneously
for about 3 seconds.
19
is on. Start the
and