Panasonic EY6950-X8 Service Manual page 5

Procedure 2A → → → → 2B → → → → 2C
Ref. No. 2C
Fig. 8
Fig. 9
Fig. 10
Removal or attachment of the Gear Box Block.
(Removal)
1. Turn the thrust plate to remove.
2. The internal parts of gear box block can be removed one after
another. (See Fig. 8)
(Attachment)
1. Start from inserting 6 pins into the driving block as shown in the
Fig. 9.
2. Assemble the other parts in reverse order as shown in the Fig. 8.
3. Install steel balls, pins and clutch springs into 6 holes. (See Fig. 10)
NOTE:
Carrier, Ring gear, and Clutch plate have their own correct
directions for proper assembly.
5
EY6950-X8