Disassembly And Assembly Instructions; Remove The Rear Cover; Remove The Ac Inlet; Remove The P-Board - Panasonic TH-P42X30D Service Manual

8 Disassembly and Assembly Instructions

8.1.

Remove the Rear cover

1. See PCB Layout (Section 3)
8.2.

Remove the AC inlet

Caution:
To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.
1. Disconnect the connector (P9).
2. Remove the screw (×1
8.3.

Remove the P-Board

Caution:
To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.
1. Disconnect the connectors (P2, P6, P9, P11, P34 and
P35).
2. Remove the screws (×5
) and remove the AC inlet.
) and remove the P-Board.
8.4. Remove
cover
1. Remove the screws (×2

2. Remove the Side terminal cover.

8.5.

Remove the Tuner unit

1. Remove the Side terminal cover. (See section 8.4.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connectors (A2, A6, A11 and A35).
4. Disconnect the flexible cables (A23, A33 and A34).
5. Remove the screws (×3
22
the Side terminal
).
) and remove the Tuner unit.