Advertisement
June 2021© Kubota B2301/2601 ROPS Cab Installation Manual
Front Bottom Hole
23. Ensure all fasteners have been started before any final torques are applied. For the 5/8"
fasteners, you can apply 205 ft-lbs of torque.
24. Un-hook the lift bolts and remove the lift straps or chain. Remove the lift bolts, store if cab
will be removed in the future.
25. Fasten the seat down onto the tractor with the provided M8 x 35 mm hex bolts.
26. Route the electrical harness from the bottom of the left A-post of the cab into the engine
bay. Connect the heavy red wire to the 12v power terminal on the starter. Use provided 1/4"
Advertisement
