Auxiliary Function Selection - Beko WTXS61232WI User Manual

Hide thumbs Also See for WTXS61232WI:
Table of Contents

Advertisement

Available languages

Available languages

4.3.10 Auxiliary function selection

Select the desired auxiliary functions before starting the programme. Furthermore, you may also
select or cancel auxiliary functions that are suitable to the running programme without pressing the
Start / Pause button when the machine is operating. For this, the machine must be in a step before
the auxiliary function you are going to select or cancel.
If the auxiliary function cannot be selected or canceled, light of the relevant auxiliary function will
blink 3 times to warn the user.
C
If a second auxiliary function conflicting with the first one is selected before starting the machine, the function
selected first will be canceled and the second auxiliary function selection will remain active.
An auxiliary function that is not compatible with the programme cannot be selected. (See, "Programme and
consumption table")
Auxiliary Function buttons may vary according to the model of the machine.
4.3.10.1 Auxiliary functions
• Prelavaggio (Prewash)
A Prewash is only worthwhile for heavily soiled laundry. Not using the Prewash will save energy,
water, detergent and time.
C
Prewash without detergent is recommended for tulle and curtains.
• Rapido (Fast+)
When this function is selected, the durations of the relevant programmes get shorter by 50%.
Thanks to the optimised washing steps, high mechanic activity and optimum water consumption,
high washing performance is achieved in spite of the reduced duration.
C
When you select this function, load your machine with half of the maximum laundry specified in the programme
table.
• Pet Hair Removal
This function helps to remove pet hair that remain on your garments more effectively.
When you select this function, Prewash and Extra Rinse steps are added to the normal programme.
Thus, washing is performed with more water and the pet hair is removed more effectively.
4.3.10.2 Functions/Programmes Selected by Pressing the Function Buttons for 3 Seconds
• Drum Cleaning
Press and hold the auxiliary function button 1 for 3 seconds to select the programme.
Use regularly (once in every 1-2 months) to clean the drum and provide the required hygiene.
Operate the programme while the machine is completely empty. To obtain better results, put
powder lime-scale remover for washing machines into the detergent compartment no. "2". When the
programme is over, leave the loading door ajar so that the inside of the machine gets dry.
C
This is not a washing programme. It is a maintenance programme.
Do not run the programme when there is something in the machine. If you try to do so, the machine detects that
there is load inside and aborts the programme.
Washing Machine / User's Manual
49 / EN

Advertisement

Table of Contents
loading

Table of Contents