Kodak DC290 User Manual page 85

Problem
Memory card is Full.
No Memory Card.
Cannot read memory card.
Camera did not establish
connection.
Camera needs service.
The receiving camera does not
have enough memory to
receive the pictures.
Unable to receive picture.
Transfer of pictures was
interrupted. Not all pictures
were sent.
Out of Range
LCD Messages
Cause
Memory card is full
and cannot hold
additional pictures
There is no memory
card inserted in the
camera.
Memory card is
corrupted.
The camera cannot
communicate with the
computer.
The camera is
malfunctioning.
In a camera to camera
communication, the
receiving camera
memory card is full.
An error has occurred
while receiving
pictures in a camera to
camera transfer.
An error has occurred
before all pictures
were transferred.
Camera is too close to
the subject.
Solution
Transfer pictures to
your computer, insert
a memory card that
has available memory,
or delete some
pictures.
Insert a memory card
into the camera.
Insert a new or
reformat the memory
card.
See page 78.
Have the camera
serviced.
Transfer pictures to
your computer or
insert a memory card
that has available
memory.
Try the camera to
camera transfer again.
Try the transfer again.
Move the camera to a
minimum of 0.3 m
(1 ft) from the subject.
6
79