Adding Sound To Pictures - Kodak DC290 User Manual

Adding Sound to Pictures

You can attach up to two minutes of recorded sound to a selected picture at any
time while reviewing your pictures. With Burst and Time-lapse pictures, recorded
sound can only be added and played when the series is collapsed. If the camera
volume control is turned down, you will not be able to hear the sound you have
recorded.
1
Scroll to view the picture you want to select.
2
To record sound, press Record, or press and
hold Record.
The microphone icon appears on the screen,
along with how long you have been
recording.
Each picture can have only one attached
sound clip, up to two minutes in length.
3
Speak into the microphone on the back of
the camera.
The green ready light blinks when there is
three seconds of recording time left before
the camera recording turns off.
4
To manually stop recording, press the
Record button again, or release Record.
A sound icon appears indicating the picture
now has attached sound. If a picture has
attached sound, pressing Delete lets you
delete the sound alone or both the picture
and sound.
5
Press one of the following softkeys:
Delete—deletes the picture and any
attached sound.
Save—saves the sound.
Play—plays the sound
Refer to "Playing Sound, Bursts, and Time-
lapse Sequences" on page 53 for
information on sound that has not been
recently recorded.
3
51