Installing The Memory; Memory Population Table - Gigabyte G262-IR0 User Manual

3-5-2 Installing the Memory

Before installing a memory module, make sure to turn off the computer and unplug the power
cord from the power outlet to prevent damage to the memory module.
Be sure to install DDR4 DIMMs on this motherboard.
Follow these instructions to install the Memory:
1. Insert the DIMM memory module vertically into the DIMM slot, and push it down.
2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
3. Reverse the installation steps when you want to remove the DIMM module.
2

3-5-3 Memory Population Table

Ranks Per DIMM
Type
and Data Width
SRx8
SRx4
RDIMM
DRx8
DRx4
RDIMM 3DS (4R/8R) x 4
LRDIMM QRx4
QRx4
LRDIMM 3DS
(4R/8R) x 4
NOTE!
l DIMM must be populated in sequential alphabetic order, starting with DIMM0.
l When only one DIMM is used, it must be populated in memory slot DIMM0.
1
DIMM Capacity (GB)
DRAM Density
8Gb 16Gb
8GB 16GB
16GB 32GB
16GB 32GB
32GB 64GB
2H-64GB 2H-128GB
4H-128GB 4H-256GB
64GB 128GB
2H-64GB 2H-128GB
4H-128GB 4H-256GB
System Hardware Installation
- 29 -
2
Speed (MT/s); Voltage (V);
Slots per Channel(SPC) and DIMM per Channel
(DPC)
1DPC
1.2V
3200
2DPC
1.2V