Start/Pause Button; Function Indicator Lights; Function Buttons - White Knight WM105V Instruction Manual

START/PAUSE BUTTON

Used to start a selected program or pause during running.
Note: The program knob must be brought to the O(off) position before selecting the
program or changing an existing program.

FUNCTION INDICATOR LIGHTS

When the start/pause button or any function button is pressed, the corresponding light
turns on. The light turns off when the function button or start/pause button is re-pressed,
or when the process or selected function is completed.
The function indicator lights are also used in the failure detection system mentioned in
section 9.

FUNCTION BUTTONS

No spin
This program is recommended to be used for your sensitive clothes on which no spinning
should be done. By pressing this function button, you can cancel the spinning process
which is included in the program.
Cold wash
When this button is pressed, your clothes are washed with cold water. With this function,
you can wash your slightly dirty clothes using less energy and water.
Note: If a 'cold' wash program is selected with the program dial then the cold wash light
will come on.
Note: Depending on which program has been selected, it may be possible to select the
function buttons after the machine has started. If the light comes on when the function
button is pressed then the function will be activated. If the light does not come on then the
additional function will not be activated.
8