White Knight WM105V Instruction Manual page 25

FAILURE
CODE
Err 02
Err 03
Err 04
(*) See the section regarding the maintenance and cleaning of your machine.
FAILURE
INDICATOR
The program ready
light blinks.
The start/pause
light and program
ready light blinks.
The program end
light blinks .
PROBABLE
FAILURE
The water level in
your machine is
below the heater.
The pressure of
your water supply
may be low.
The pump has
failed or the pump
filter is obstructed.
There is an
excessive amount
of water in your
machine.
24
THE PROCESS
TO BE DONE
Turn the tap fully
on. Water may be
cut, check it. If the
problem is still
continuing, your
machine will
automatically stop
after a while.
Unplug your
machine, turn off
the tap and contact
the authorised
service agent.
Clean the pump
filter. If the problem
persists, contact
the authorised
service agent. (*)
Your machine will
automatically drain
the water. After
your machine has
completed the
draining process,
shut down your
machine and
unplug. Close the
tap and contact the
authorised service
agent.