Table of Contents
Advertisement
FAILURE
The washing result is not
good.
The water is drained from
the machine as soon as it
is filled.
No water is seen in the
drum during washing.
There are residues of
detergent on the clothes.
There are grey stains on
the clothes.
(**) See the section concerning installation of your machine.
PROBABLE CAUSE
Clothes exceeding the
maximum capacity have
been filled in your
machine.
Your water may be hard.
Distribution of the clothes
in your machine is not
well-balanced.
The end of the water drain
hose is in a position too
low according to the
machine.
No failure. The water is at
the lower part of the drum.
The pieces of some
detergents which do not
dissolve in water may stick
to your clothes as white
stains.
These stains may be
caused by oil, cream or
ointment.
22
METHODS OF
ELIMINATION
Put the clothes in your
machine in a manner not
to exceed its maximum
capacity.
Use the amount of
detergent according to the
declaration of the
detergent producer.
Spread the clothes inside
the machine in an orderly
and well-balanced manner
.
Place the water drain
hose in an appropriate
height.(**)
-
By setting your machine to
the "Rinse" program,
make an additional rinse
or eliminate the stains
after drying, with the help
of a brush.
In the next washing
operation, use the
maximum detergent
amount declared by the
detergent producer.
Advertisement
Table of Contents
