Fan - Dell Inspiron 9300 Service Manual

Back to Contents Page
System Fans
Dell™ Inspiron™ 9300 Service Manual
Removing the System Fans
Replacing the System Fans
Removing the System Fans
CAUTION:
NOTICE:
as the back panel) on the computer.
NOTICE:
1. Follow the instructions in
2. Remove the
3. Remove the keyboard.
4. Remove the
5. Remove the
NOTE: This computer has two system fans. One is for the processor (the larger one on the left side) and the other is for the graphics card (the smaller
one on the right side).
6. Remove the two M2.5 x 5-mm screws from each of the fans, and then remove the connector that connects each fan to the system board.
7. Lift each fan out of the computer.

1 fan

2 M2.5 x 5-mm screws (2)
3 fan cable
4 fan-cable system board connector
Great user manuals database on
Before you begin the following procedure, see the safety instructions in the Product Information Guide.
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
To avoid damaging the system board, you must
"Before Working Inside Your
hinge cover.
display assembly.
palm rest.
UserManuals.info
remove the main battery before you begin working inside the computer.
Computer."