Download Print this page

EM-Technik Macro Filter 7F900 Assembly And Operation Instructions Manual page 6

Advertisement

9 Troubleshooting /
Fault Rectifi cation
Error
Possible cause
Filter housing
Filter defective
leaking
No fl ow
Filter membrane
clogged
10 Manufacturer's Declaration
• Our products do not fall under the scope of the Ma-
chinery Directive 2006/42/EC. However, they can be
incorporated in an installation that is considered as
machinery. In this case regard the following note: The
products may not be put into operation until it is made
sure that the fi nal machinery into which our products
are incorporated complies with the provisions of the
Machinery Directive 2006/42/EC.
• Based on the fl uid class, pressure and nominal diame-
ter, our products fall under diagram 8 of the Pressure
Equipment Directive PED 2014/68/EU. Because of the
ratio of nominal diameter, pressure and volume, they
fall only under article 4 paragraph 3 and are designed
and manufactured according to applicable good engi-
neering practice. They must not carry any CE marking.
• The warranty of armature expires in the following ca-
ses: Operating conditions which do not follow the in-
tended use or do not follow technical specifi cations.
Improper installation or assembly. Just as well as inap-
propriate use, dismantling or modifi cation.
• Failure to observe information provided here may lead
to injuries, material damage, malfunctions and impuri-
ties due to escaping medium.
11 Contact
In case of questions or suggestions please contact us:
EM-Technik GmbH
Industriestr. 2
Tel
67133 Maxdorf
Fax +49 6237 407-77
Germany
info@em-technik.com
EM-Technik GmbH - Industriestraße 2 - 67133 Maxdorf - Germany
info@em-technik.com
Error rectifi cation
Check fi lter for
damage, replace if
necessary
Change fi lter mem-
brane
+49 6237 407-0
www.em-technik.com
6

Advertisement

loading